The Journey of Tucker 960
Subtitle
Blog
Flow Wrapper Troubleshooting
|
|
Automatic Packing Line
Flow pack is now an extremely popular and common packing method, and an increasing number of clients are buying flow wrapping machine from us.
But because a few clients' operation techniques are erroneous, causing the system to malfunction, we'll list some frequent leak wrapper troubleshooting here.
1. The spine seal wrinkle is a result of the mismatch between the rate of this centre seal wheel and the packing rate of the machine. There is just a black rotating handle between the two centre seal wheels. It's used to correct the rate of their central seal wheel. Adjust the speed to the leftside. Slow, turn directly to speed up.
2. In the event the spinning handle does not have any effect, the belt could fall because of too many revolutions. Open the case cap, there is actually a belt at the bond with the handle, assess whether the belt has been dropped, and restore it.
Flow Wrap Machine
1. Item cutting could possibly be caused by inaccurate material degree alteration, just correct the material degree handle.
2. There may also be difficulties with the product itself, such as for example different lengths and shapes.
3. The speed will be too fast. The speed will be too fast, and the ending seal speed have not maintained. That means it's possible to decrease the packing rate or boost the end-sealing rate.
Inch. Click Clear. After emptying, shut down and restart.
2. In the above steps still do not work, check the end seal encoder in the lower case, the motor includes a belt on it, and find out if it is loose. If it is loose, then this fault alarm problem usually occurs.
If you've got additional flow wrapper problem, please contact us for free.
Flow pack is now an extremely popular and common packing method, and an increasing number of clients are buying flow wrapping machine from us.
But because a few clients' operation techniques are erroneous, causing the system to malfunction, we'll list some frequent leak wrapper troubleshooting here.
Back guarantee folds:
1. The spine seal wrinkle is a result of the mismatch between the rate of this centre seal wheel and the packing rate of the machine. There is just a black rotating handle between the two centre seal wheels. It's used to correct the rate of their central seal wheel. Adjust the speed to the leftside. Slow, turn directly to speed up.
2. In the event the spinning handle does not have any effect, the belt could fall because of too many revolutions. Open the case cap, there is actually a belt at the bond with the handle, assess whether the belt has been dropped, and restore it.
Flow Wrap Machine
Cut goods:
1. Item cutting could possibly be caused by inaccurate material degree alteration, just correct the material degree handle.
2. There may also be difficulties with the product itself, such as for example different lengths and shapes.
3. The speed will be too fast. The speed will be too fast, and the ending seal speed have not maintained. That means it's possible to decrease the packing rate or boost the end-sealing rate.
End seal encoder collapse:
Inch. Click Clear. After emptying, shut down and restart.
2. In the above steps still do not work, check the end seal encoder in the lower case, the motor includes a belt on it, and find out if it is loose. If it is loose, then this fault alarm problem usually occurs.
If you've got additional flow wrapper problem, please contact us for free.
Categories: None
Post a Comment
Oops!
The words you entered did not match the given text. Please try again.
Oops!
Oops, you forgot something.